Setting Through Camera Osd Menu; Camera Lens Control - LUXSAR VDRPJ10 Manuel D'utilisation

6.6.2

Setting through Camera OSD Menu

Set Cruise Path
Press and hold the key <CAMERA MENU> to enter the OSD setup menu.
Then go to the page with the cruise setting item to set up the cruise path;
for further details, refer to the dome camera's user manual. The OSD menu
shown below is for your reference; it would change subject to different
cameras.
RECORD START
RECORD END
RUN CRUISE
EXIT
Execute Cruise Path
Move the cursor to the item of RUN CRUISE to run the cruise path.
6.7

Camera Lens Control

Users can control the functions of camera lens under the Camera Control mode.
Please refer to the following descriptions of lens control keys.
Brightness Function
Press the <Brightness +> key to increase the video brightness and the
<Brightness -> key to decrease video brightness.
User's manual VDRPJ10 Version 2.3
CRUISE
ENTER
ENTER
ENTER
YES
26