System Alarm List; Camera Type And System Baud Rate Setting - LUXSAR VDRPJ10 Manuel D'utilisation

5.8

System Alarm List

The item allows users to list the latest 10 Alarm information from system bus,
including event triggered time and triggered camera's ID. Press <ESC> to exit
this mode.
1.8 Alarm list
Press Enter to setup
5.9

Camera Type and System Baud Rate Setting

The item allows users to assign a proper protocol or camera type to each
camera through the keyboard so that when under the dome control mode, users
could call a specific camera and control it. In addition, users can set system
baud rate. Press <1> to assign a protocol. Press ◄ or ► key to change the
setting and ▲ or ▼ key to select a camera; Press <ESC> when finished. The
options include DSCP, PELCO-D, PELCO-P and Fix Camera.
1.9 Camera Type & Comm.
Press 1: Type 2: Comm.
1.9.1 Camera ID #001
[DSCP] PEL-D PEL-P ►
1.9.1 Camera ID #001
◄
Press <2> to set system baud rate. Press ◄ or ► key to change the setting.
1.9.2 System Baud Rate
a. Default Setting
1.9.2 System Baud Rate
b. Baudrate 9600 bps
1.9.2 System Baud Rate
c. Baudrate 4800 bps
1.9.2 System Baud Rate
c. Baudrate 2400 bps
User's manual VDRPJ10 Version 2.3
FixCam
13