Technical Data - Lenze 8200 vector Instructions De Montage

Show/Hide Bookmarks
Conformity
Approvals
Max. perm. motor cable length Max. perm. motor cable length
(without additional output choke)
Environmental conditions
Temperature ranges Temperature ranges
Permissible installation height Permissible installation height
Vibration resistance
Permissible mounting positions
Free space
Discharge current to PE (EN 50178)
Enclosure (EN 60529)
Protection measures against
Insulation of control circuits
Operation in public supply networks
(Limitation of harmonic currents
according to EN 61000-3-2) according to EN 61000-3-2)
1)
For compliance with EMC regulations, the permissible cable lengths must be changed.
2)
The additional measures described only ensure that the controllers meet the requirements of the EN 61000-3-2. The
machine/system manufacturer is responsible for the compliance with the regulations of the machine!
L
CE
UL 508C
1) )
shielded:
unshielded:
Class 3K3 to EN 50178
(without condensation, average relative humidity 85 %)
transport
storage
operation operation
0 ... 4000 m amsl
above 1000 m amsl the rated output current is to be reduced by
5 %/1000 m
Acceleration resistant up to 0.7 g
vertical
≥ 100 mm below and above
side-by-side mounting without distance in between
> 3.5 mA
IP 20
Short circuit, earth fault (earth-fault protected during operation,
limited earth-fault protection during power up), motor stalling, motor
overtemperature (input for PTC or thermal contact, I
Safe mains disconnection:
Double basic insulation according to EN 50178
Total power
connected to
the mains
< 0.5 kW
0.5 kW ... 1 kW with active filter (in preparation)
> 1 kW
EDK82EV222 DE/EN/FR 6.0

Technical data

Low-Voltage Directive (73/23/EEC)
Underwriter Laboratories (File-No. E132659)
Power Conversion Equipment as of version
E82EVxxxKxBxxxXX 1F 14
With rated mains voltage and With rated mains voltage and
50 m
chopper frequency of 8 kHz
100 m
-25 °C ... +70 °C
-25 °C ... +60 °C
-10 °C ... +55 °C
above +40 °C the rated output current is to be
reduced by 2.5 %/°C
Compliance with the requirements
With mains choke
without additional measures
2
2
t monitoring)
2)
9