2
Commissioning
2.1
Check contents of pack
The following items are supplied
two radios with belt clip
two battery packs
one instruction manual
2.2
Fitting the battery packs
Your radio units are supplied with two rechargeable battery packs,
which must be fitted before using the equipment.
1.
To release the belt clip, pull gently on the upper
tab and slide the belt clip upwards (see 2.3).
2.
Then open the compartment by pulling the
cover upwards by the catch.
3.
Now insert the battery pack taking care to
ensure that the polarity is correct. The wrong
polarity can damage both the battery pack and the unit.
4.
Close the battery compartment and re-fix the belt clip (see 2.3).
Note: When the battery pack is weak and needs to be recharged, the
battery symbol
charged, the
Do not throw batteries into the fire or immerse in water. Do not dispose
of old or defective batteries with the normal household waste.
Note: In place of the battery pack you can also use three not
rechargeable 1.5V AAA alkaline batteries. Please use only the best
quality. Take care to ensure that the polarity is correct when inserting.
- Commissioning -
will flash in the display. When the battery is fully
symbol will appear.
one charging station
one mains power supply
two headsets
THIS SIDE UP
+
47