Commissioning; Check Contents Of Pack; Fitting The Battery Packs - switel WT118 Mode D'emploi

2

Commissioning

2.1

Check contents of pack

The following items are supplied
two walkie-talkies with belt clip
two battery packs
one instruction manual
2.2

Fitting the battery packs

Your walkie-talkie is supplied with two rechargeable Ni-MH battery
packs, which must be fitted before using the equipment.
1. Unclip the battery compartment cover on the rear and open the
compartment. If the belt clip has been fitted, this must be
removed first.
2. Now insert the battery pack taking care to ensure that the polarity
is correct. The wrong polarity can damage both the battery pack
and the unit.
3. Close the battery compartment.
Note: When the battery pack is weak and needs to be recharged, the
battery symbol
charged, the
Note: In place of the battery pack you can also use four 1.5V AAA
alkaline batteries. Please use only the best quality.
Take care to ensure that the polarity is correct when inserting.
Do not place the walkie-talkie in the charging station if you are using
normal batteries.
Do not throw batteries into the fire or immerse in water. Do not
dispose of old or defective batteries with the normal household waste.
- Commissioning -
will flash in the display. When the battery is fully
symbol will appear.
one charging station
one mains power supply
two headsets
41