Intended Use; Safety Instructions; Target Group - Parker GL Plus Série Notice D'utilisation

EN | Operating Instructions

Intended use

The information on the type label must be
observed. Non-observance of the data given
there is regarded as improper use. The filters
are suitable for filtering compressed air and
(gaseous) nitrogen within the limits of the
stipulated values.
Impermissible applications
The filtration of critical fluids is not per-
mitted. The filters must never be used for
filtration of explosive, flammable or noxious
gases of fluid group 1 according to Directive
97/23/EC.
Changes to the pressure vessels are not
permitted. Modifications will endanger the
operational safety and may cause damage
or personal injury.

Target group

The present Operating Instructions are in-
tended for specialists charged with installa-
tion, operation and maintenance of the filter.
Such persons must be trained in handling
pressure devices and have basic knowledge
of how to handle pressure devices.
20
Compressed air filter series GL Plus

Safety instructions

Hazard due to a sudden release of
pressure!
Never remove any parts of the filter, or
manipulate the same in any way, for as long
as the filter is still pressurised! A sudden es-
cape of pressure may cause serious injuries.
Completely close the filter housing. The
marks on the top and bottom of the filter
must be aligned (Fig. 8).
Depressurise the filter before carrying out
any work on the filter.
Hazard due to hot surfaces!
The fluids flowing through the filter can have
a temperature of up to 100 °C (212 °F). This
can heat up the filter housing.
Do not touch hot surfaces!
Wear safety gloves if applicable!
Accident prevention
Heed the specific accident prevention regu-
lations, for example UVV/BGV in Germany.
Note the operating instructions issued by
the owner.
Contamination hazard
The filter housing and filter elements might
be contaminated by the removed substan-
ces. For this reason, make sure to heed the
safety data sheet of the used fluid! Wear
protective clothing if applicable (gloves and
breathing protection).
Dispose of all parts in compliance with
applicable disposal regulations after removal
or element change!
GL Plus 2-19_Int1