Setting The Operating Mode; Use As Stand-Alone Device Or Master Device - MC Crypt 59 11 95 Notice D'emploi

7. Start-up

7.6 Setting the operating mode

The effect light can be controlled with the integrated controller (music control via microphone or automatic mode) or
with an external DMX controller.
In addition, it can be used as a master device to control other connected effect lights (via the integrated controller)
or as slave device via the controller of another effect light.

Use as stand-alone device or master device

In this operating mode, the effect light can be used as a stand-alone device or a master device.
As master device, the integrated controller of the effect light controls connected slave devices. As slave device, the
effect light is controlled by the controller of the connected master device.
Automatic operation:
• Press the ESC button (5) until Au01 or Au02 is displayed.
• Select the desired operating mode using the UP button (6) or the DOWN button (7).
Au01: Automatic mode with slow movements
Au02: Automatic mode with fast movements
• Press the ENTER button (8) to save your changes.
Music control via the integrated microphone:
• Press the ESC button (5) until Snof or Snon is displayed.
• Select the desired operating mode using the UP button (6) or the DOWN button (7).
Snof: Music control off
Snon: Music control on
• Press the ENTER button (8) to save your changes.
32