Operation; Setting The Operating Mode; Use As Stand-Alone Device Or Master Device; Use As Slave Device - MC Crypt 59 12 82 Notice D'emploi

Operation

Setting the Operating Mode

The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slave operation, or as slave device via the controller of another effect light.
Use the LED display and function buttons FUNC, UP, DOWN and ENT to set the operating mode.
• Press FUNC to get to the setting mode.
• Select the desired operating mode with the UP and DOWN buttons.
• Confirm your selection with ENT.
• Press FUNC again to select the option for the respective operating mode.
• Select the desired option with the UP and DOWN buttons.
• Confirm your selection again with ENT.
Display Type of operation
Addr DMX mode
Auto Automatic operation
Sund Sound-to-light mode
CoLr manual colour setting

Use as Stand-Alone Device or Master Device

• Switch to automatic operation (display auto), sound to light control (display Sund) or manual colour setting
(display CoLr).
• Select the desired option of the selected operating mode.
When the device is operated in automatic mode, sound to light control or manual colour setting, it is
automatically set to stand alone or master device.

Use as Slave Device

• Switch into DMX operation (display Addr).
• Set the address A001 as DMX start address.
Only one device in a master-slave-chain must be defined as master device. All other devices must be
defined as slave devices.
Option Function
A001-A512 Setting the DMX starting address
Aut1-Aut6 6 Automatic programmes
SOU1-SOU4 4 Sound-to-light programmes
CoL0-CoL9 10 colours
25