Starting The Engine; Working - Stihl RB 200 Notice D'emploi

English
Removing
Pull back the coupling sleeve (1) as
N
far as it will go and hold it there
Pull the high-pressure nozzle (2)
N
out of the coupling
Release the coupling sleeve
N
16

Starting the Engine

NOTICE
Lack of water can damage the high-
pressure pump. Only start the engine
when the water hose is connected and
the water supply is turned on.
Connect the high-pressure hose
N
Connect the water supply hose and
N
turn on the water supply
Vent the system
N
See the sections in this instruction
manual on Connecting the Water Supply
and Venting the System.
See the Kohler owner's manual for
complete starting instructions.

Working

Actuating the spray gun
Direct the spray attachment towards
N
the surface to be cleaned
1
2
Release the trigger lockout (1)
N
Squeeze the spray gun trigger (2)
N
Standby mode
NOTICE
Running the engine for more than
2 minutes without active spraying can
cause serious damage to the pressure
washer.
Shut off the engine:
before taking a break
–
if leaving the machine unattended
–
any time active spraying will be
–
interrupted for more than 2 minutes
RB 200