Kessel Aqualift S Compact Notice D'utilisation D'origine page 48

Fitting the level detection (only Tronic variants)
▶ Clip immersion pipe onto fastener (conduit pipe side) if necessary. 
▶ Latch securing clip into place. 
Fitting the alarm probe (only Tronic variants)
▶ Insert the optical probe into the protective tube and fasten in place with
two screws. 
1
2
▶ Clip protective tube onto fastener (inlet side). ➍
▶ Latch securing clip into place. ➎
3
5
4
Fig. [14]
48 Installation and operating manual 016-059