Kessel Aqualift S Compact Notice D'utilisation D'origine page 47

4.6 Installing the electrical components
Observe additional instructions and safety information!
3
▶ The Tronic variants have separate instructions for the control unit.
Fitting the pump(s)
▶ Hang pump(s) in place. ➊
▶ Connect pump(s) to pressure connection. ➋
▶ Lock the quick-release closure in position. 
▶ Pull the pump cable through the conduit pipe.
▶ Pull the probe cable / hoses through the conduit pipe if necessary.
L If applicable, ensure that the float switch hangs downwards freely (rest
position).
2
1
Fig. [13]
016-059 Installation and operating manual 47