Compex FIT 5.0 Mode D'emploi page 18

2. SELECT AN ELEMENT TO DO
The element to do can be a programme or a task. The element to do is selected by default, but it is
possible to select another.
The next to a programme or a task signifies that it has been done.
3. SELECT ELECTRODE PLACEMENT
N.B.: In most cases a different electrode placement cannot be selected because it is directly linked to the
objective.
4. CONNECT THE MODULES TO THE ELECTRODES
Stick the electrodes to your skin. The module is attached to the electrode from the side. Slide the module
onto the electrode's snap until it clips into place.
A Select the desired element
A
B Confirm your selection
B
C Return to the previous step
A
A Select the desired electrode placement
A
B Confirm your selection
C B
C Return to the previous step
A
EN
16