Compex FIT 5.0 Mode D'emploi page 21

EN
Cycles: Turns the Cycles function on (ON) or off (OFF)
The Cycles function is for people who are already accustomed to electrostimulation and want to perform
several training cycles. If the Cycles function is turned on (ON) an additional screen will appear for certain
programmes (programmes inducing powerful muscle contractions) enabling the training cycle to be
selected.
The cycle logic refers to the workload performed by electrostimulation. And just like a normal workout,
one has to to start with an amount of work then increase it over the course of the cycles. Thus, it is
recommended starting with the 1st cycle and going on to the next level when the cycle is finished,
normally after 4 to 6 weeks of stimulation based on 3 sessions per week. It is also important to have
reached significant stimulation intensities in sessions before going on to another cycle.
Power saving: Turns the Power saving function on (ON) or off (OFF). Decreases the intensity and the
backlighting time.
Sound: Turns the Sound function on (ON) or off (OFF).
Contraction sound: Turns the contraction arrival warning sound on (ON) or off (OFF).
Set time: Allows you to set the time on the device.
Set date: Allows you to set the date on the device.
Pair a new module: Enables a new module to be paired to the remote control.
Reset the device: Enables the device to be re-set and return to the basic settings (Favourites deleted,
Objectives cleared, Default settings).
System info: Enables information related to the device to be viewed.
19