Compex FIT 5.0 Mode D'emploi page 16

3. SELECT ELECTRODE PLACEMENT
4. CONNECT THE MODULES TO THE ELECTRODES
Stick the electrodes to your skin. The module is attached to the electrode from the side. Slide the module
onto the electrode's snap until it clips into place.
5. TURN ON THE MODULES
To launch the programme, see the section entitled "Start a stimulation programme."
A Select the desired electrode placement
A
B Confirm your selection
C B
C Return to the previous step
A
A Return to the previous step
B Confirm your selection
A B
EN
14