General Information And Intended Use; Safety Instructions - Hauff-Technik HSI 150-SEGMENTO Instructions De Montage

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

HSI 150-SEGMENTO
Contents

1 General information and intended use

2 General notes/safety instructions
3 Description of the HSI 150-SEGMENTO and/or SEGMENTO KKS combination kit
4 Scope of delivery for the HSI 150-SEGMENTO and/or SEGMENTO KKS combination kit
5 Required tools and aids for the HSI 150-SEGMENTO and/or SEGMENTO KKS combination kit
6 Installation of the HSI 150-SEGMENTO and/or SEGMENTO KKS combination kit
1
General information and intended use
The HSI 150-SEGMENTO is the fastest solution for sealing cables and pipes particularly gently and neatly at
up to 0.5 bar (outside pressure). The individual segments can be installed without any problem. Cables can
be replaced or installed at a later date without opening the entire system.
2
General notes
Any nationally applicable regulations regarding the laying and backfilling of pipework
must be followed.
Pack the foundations and cable support well before laying the cables/pipes to prevent
the cables/pipes sinking.
The incorrect laying of cables or ducts and improper filling of the cable trench causes
settlement, which can lead to damage and leaks.
Only open cable entries just before fitting with cables to avoid accidental damage during
foundation works.
Cables or pipes must not be fed into the entry mechanically.
Further accessories and information at www.hauff-technik.de and in the technical data sheets.

Safety instructions

During installation, protect the cable entry from damage, moisture and impurities. Check
that all necessary components have been delivered and that they are not damaged.
You must not install damaged components.
Installation must comply with the relevant professional association regulations, VDE provi-
sions, national safety and accident prevention regulations as well as company regulations
(work and procedural instructions).
Do not use solvent-based cleaning agents to clean cable entries. We recommend using
cable cleaner KR M.T.X. (Art.No. 0331010100).
Legend
1
Workflow
Important information
10
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Segmento hsi 150

Table des Matières