Installation Instructions; Connection To Power Mains - Franke CA 52M Mode D'emploi Et Installation

Installation instructions

Place the appliance in the compartment; secure the oven to the unit with
the 4 screws provided, through the holes in its side panels.
If the oven is to be fitted underneath a cooktop, first turn the cooktop
assembly (R) to the right or left so that the oven fits properly.

Connection to power mains

FRANKE ovens are equipped with a three pole power cable with free terminals.
If the oven is permanently connected to the power supply, install a device to ensure that it
is disconnected from the power supply, with a contacts opening distance (of at least 3
mm) to ensure total disconnection in conditions of category III overvoltage. Make sure:
a) the plug and socket are suitable for a 16A current
b) both are easily accessible and positioned so that no live part can be accessed when
c) the plug can be easily inserted
d) when plugged in, the oven doesn't rest against the plug when installed in the cabinet
e) the same socket must not be used for two plugs
f) a 3 x 1.5 mm2 cable
g) the polarity of connection of the free terminals must be
N.B: make sure that the characteristics of your power system
(voltage, maximum power and current), are compatible with
those of your FRANKE oven.
inserting or removing the plug
type
the power cable
respected
(Brown=Phase – Blue=Neutral – YellowGreen=Earth)
H05VV-F should be used to replace
BLU
BLUE
GIALLO-VERDE
YELLOW-GREEN
MARRONE
BROWN
L
N
25