Franke CA 52M Mode D'emploi Et Installation page 18

End Cooking Timer Knob
The end cooking timer is a practical device that turns
the oven off automatically at a set time, ranging from
one to 120 minutes. To use the end cooking timer, the
ringer must be wound up by turning knob (C) almost
one full turn clockwise; now turn back to the time
setting you require (align the index mark on the front
panel with the corresponding number on the knob).
When the cooking time has expired, in addition to the
timer ringing, the oven is automatically turned off.
N.B. The oven will stay hot at around the set
temperature for a considerable period of time after it
has been switched off; to avoid overcooking or
burning the food, remove it from the oven
immediately.
Warning: to use the oven in manual mode, i.e. without using the end cooking
timer, you should align the symbol on the knob with the reference mark
on the control panel. When the oven is turned off, the end cooking timer can
be used just like a normal minute minder.
The electronic cooking timer
Enables programming of the oven in the following
modes:
• delayed cooking with set duration;
• immediate cooking with set duration;
• minute counter.
Button functions :
Setting the digital clock
After the appliance has been connected to the mains or a power failure, the display will
flash on: "0.00"
• Press the button
Button
Button
To adjust the clock, proceed as described above:
Manual operation
Once the correct time has been set, the programmer automatically switches to manual
mode.
Note: To reset the manual mode after each "Automatic" cooking, press the button
Starting delayed cooking with set duration
You must set the cooking duration and the time at which it is to end. Let us suppose that
the display indicates 10:00 a.m. and that we wish to cook something for 30 minutes and
we want cooking to end at 13:00.
1. Turn the oven control knob to the desired cooking mode and temperature (for
: hour, minute counter
: cooking duration
: end of cooking
: manual switches
: time setting (back)
: time setting (forwards)
and then (within 4 seconds) buttons
increases the time setting.
decreases the time setting.
example: convection mode at 200°C)
C
D
and to set the correct time.
.
17