Utilisation Conforme; Installation, Montage Et Démontage - steute ES 97 Extreme Instructions De Montage Et De Câblage

Masquer les pouces

Table des Matières

ES 97 Extreme

Montage- und Anschlussanleitung / Positionsschalter

Mounting and wiring instructions / Position switch

Instructions de montage et de câblage / Interrupteur de position

Istruzioni di montaggio e collegamento / Interruttore di posizione

Instruções de montagem e instalação / Chave fim de curso

Инструкция по монтажу и подключению / Позиционный выключатель

English

CAUTION

High temperatures. Risk of burns! Ignoring this

message may lead to injuries. Observe permitted

ambient temperatures.

- Use device only within the permitted electrical load limits (see

technical data).

N.B.

The electrical connection may only be carried out by authorised per-

sonnel. Do not use the device as a mechanical endstop. Any mounting

position is possible. Reconstruction and alterations to the device

are not allowed. The described products were developed in order to

assume safety functions as part of an entire plant or machine. A com-

plete safety system normally covers sensors, monitoring modules,

indicator switches and concepts for safe disconnection. Therefore, a

validation according to EN ISO 13849-2 or EN 62061 is necessary. Fur-

thermore, the Performance Level according to EN ISO 13849-1 and

SIL CL Level according to EN 62061 can be lower than the single level

because of the combination of several safety components and other

safety-related devices, e.g. by serial connection of sensors. It is the

responsibility of the manufacturer of a plant or machine to guarantee

the correct general function. steute does not assume any liability for

recommendations made or implied by this description. Subject to

technical modifications. New claims for guarantee, warranty or liability

cannot be derived from this document beyond the general terms and

conditions of delivery.

Maintenance, repair and service

DANGER

Live parts. Electric shock hazard! Ignoring this

message will lead to serious injuries or death. Do

not repair defective or damaged devices. Replace

them. Exception: Use steute's original spare parts

only to repair the device. Do not rebuild or modify

the device in any way.

With rough conditions, we recommend routine maintenance as follows:

1. Check actuator for easy operation.

2. Remove all dirt or particles.

3. Check sealing of the cable or conduit connections.

Cleaning

DANGER

Live parts. Electric shock hazard! Ignoring this

message will lead to serious injuries or death.

Observe degree of protection.

- In case of damp cleaning: use water or mild, non-scratching,

non-chafing cleaners.

- Do not use aggressive cleaners or solvents.

Disposal

- Observe national, local and legal regulations concerning disposal.

- Recycle each material separately.

Français

AVIS

D'utilisations non conformes. Risque de défail-

lance fonctionnelle! Le non-respect causer des

dommages matériels. N'utiliser l'appareil qu'en

conformité avec les conditions de fonctionnement

stipulées dans ces instructions de montage et de

câblage (voir données techniques).

Groupe cible: personnel autorisé et compétent.

Toutes les manipulations décrites dans cette notice d'installation ne

doivent être effectuées que par du personnel formé et autorisé par la

société exploitante.

1. Lire et comprendre les instructions de montage et de câblage.

2. Respecter les règles de sécurité et de prévention des accidents en

vigueur.

3. Installer le dispositif et le mettre en service.

La sélection et l'installation des appareils et leurs intégrations dans

les systèmes de commande exigent une connaissance approfondie

de toutes les lois pertinentes, ainsi que des exigences normatives du

fabricant de la machine.