Other Settings; Energy-Saving Mode; Auto-Off Function - Melitta Caffeo SOLO Mode D'emploi

Descaling phase 2 (
When illuminates, proceed as follows:
• Empty and reinsert the drip tray.
• Rinse the water reservoir thoroughly.
• Fill the water reservoir with tap water up
to the max. mark.
• Insert the water reservoir.
• Press the button to continue with the
descaling programme (takes about 5
minutes).
Descaling phase 3 (
When illuminates, proceed as follows:
• Empty the drip tray and reinsert it.
When is illuminated, the descaling
programme is finished.
• Insert the water filter if necessary
("Water hardness and filter", page 18).

Other settings

Energy-saving mode

After the last action, the appliance
switches automatically (depending on the
settings) to the energy-saving mode. The
appliance is set to 5 minutes
factory.
• Switch on the appliance.
• Press the and
simultaneously until
• Press the button twice.
illuminates.
• Press the button until one of the four
times is set. The time is displayed by the
beans on display 9.
22
BA_Solo_082016.indd 22
):
• Press the
):

Auto-OFF function

The appliance switches off automatically
after the last action (depending on the
setting). From the factory, the appliance is
set at 30 minutes
• Switch on the appliance.
• Press the
• Press the
• Press the
in the
buttons
flashes.
• Press the
Display
flashing
button to confirm the
setting.
.
and buttons
simultaneously until
button three times.
illuminates.
button until one of the
four switch-off times is set. The time is
displayed by the beans on display 9.
Display
flashing
button to confirm the
setting.
Time
5 minutes
(factory setting)
15 minutes
30 minutes
Off
flashes.
Time
30 minutes
(factory setting)
2 hours
4 hours
8 hours
21.09.2016 07:23:53