Auto-Off Function; Brewing Temperature - Melitta SOLO Mode D'emploi

Transport, Storage and Disposal
Display
fl ashing
■ Press the
setting.

Auto-OFF function

The appliance switches off automatically
after the last action (depending on the
setting). The appliance is factory-set at
30 minutes .
■ Switch on the device.
■ Press the
simultaneously until
■ Press the
illuminates.
■ Press the
four switch-off times is set. The time is
displayed by the beans on display 9.
Display
fl ashing
■ Press the
setting.
24
Time
5 minutes
(factory setting)
15 minutes
30 minutes
off
button to confi rm the
and buttons
fl ashes.
button three times.
button until one of the
Time
30 minutes
(factory setting)
2 hours
4 hours
8 hours
button to confi rm the
Operating Instructions: Melitta

Brewing temperature

From the factory, the brewing temperature
is set to Level 2 (medium
■ Switch on the device.
■ Press the
and
simultaneously until
■ Press the
button four times.
illuminates.
■ Press the
button, until one of the
three brewing temperatures is set. The
temperature is shown by the beans
on the display 9 (from
= high).
■ Press the
button to confi rm the
setting.
Adjusting the grinding fi neness
The grinding fi neness was set before the
appliance was delivered. We therefore
recommend to only adjust the grinding
fi neness after about 1 0 00 coffee
preparations (about 1 year).
The grinding fi neness should only be
adjusted immediately after starting coffee
dispensing and only while the mill is
running.
■ Pull off the cover 11 to the right.
■ Start dispensing coffee.
■ Put the lever (Image E) in a desired
position
(left = fi ne to right = coarse).
■ Insert the cover and swivel to the left
until it clicks in.
Solo
® ®
).
buttons
fl ashes.
= low to
| 1828-0618 | 2018-08