PowerPeak FTM8317P Mode D'emploi page 25

Step 1
Open the carton and take out all the parts. Place the main frame on the floor.
Step 2
Pull up both columns and the computer, as shown in the figure. Support the columns and the computer
with your hands, to avoid falling down and damaging.
Be careful: when assembling the device, please make sure the columns do not press on the wires that
are in the columns.
Step 3
Attach the left column to the main frame with bolts, washers and the allen wrench, as shown in the
figure. Support the left column with your hands, to avoid falling down and damaging.
Step 4
Attach the right column to the main frame with bolts, washers and the allen wrench, as shown in the
figure. Support the right column with
your hands, to avoid falling down and damaging.
25