Transmitter Controls - Reely Piper J3 Cub Notice D'emploi



8. Transmitter Controls

1. Transmitter aerial carry handle
2. Function control lamp
3. Switch mode 1/mode 2
4. Control lever for the motor function and rudder (mode 1)
Control lever for the elevator and rudder (mode 2)
5. Trim button for the motor function (mode 1)
Trim button for elevator (mode 2)
6. Trim button for the rudder (mode 1 and 2)
7. Function switch
8. DIP switches for transmitter setting
9. Trim button (no function)*
10. Charge control lamp
11. Trim button for the elevator (mode 1)
Trim button for throttle (mode 2)
12. Control lever for the elevator (mode 1)*
Control lever for the motor function (mode 2)*
Figure 2
* Since the model plane „Piper J3 Cub" has no aileron,
the rudder is used for direction control.
For this reason, the manufacturer placed the rudder
control, which is performed with the left control lever
in modes 1 and 2, on the right lever. The direction
control of the model therefore is executed with the
right control lever as usual.
The side control of the left control lever, as well as
the associated trim button therefore are without
function.
39