2. Intended Use
This product is an electrically powered motor model airplane with wireless radio control via the remote control system
included in the delivery. The model is designed for indoor operation and must only be used on wind-still or low-wind
days outside. The model airplane is pre-assembled and is delivered with built-in remote control and drive components.
The product must not become damp or wet.
The product is not suitable for children under 14 years of age.
Observe all safety information in these operating instructions. They contain important information
on handling of the product.
You alone are responsible for the safe operation of the model!
3. Product Description
The plane model Piper J3 Cub is a pre-fabricated RtF model (Ready to Fly), that is ready for use with just a few steps.
All drive and control components are built-in and ready for use. Control takes place via an easy to operate radio
remote control system that may be operated either in mode 1 or mode 2.
For operation of the remote control, 4 mignon batteries (e.g. Conrad item No. 652504, pack of 4, order 1x) are required.
The two operating levers at the remote control are used to control motor speed, flight height and flight direction.
The LiPo battery to be inserted in the model is charged with the included remote control transmitter.
4. Explanation of Symbols
The symbol with the exclamation mark points out particular dangers associated with handling, function or
operation.
The „arrow" symbol indicates special advice and operating information.
33