Electrical Safety - GreenWorks Tools 2502207 Manuel D'utilisation Et De Sécurité

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
parts for safety. Use only
genuine replacement parts
and accessories.
RECOMMENDATION
CLASS II MACHINE
The machine
supplied via a residual current
device (RCD) with a tripping
current of not more than 30 mA.

ELECTRICAL SAFETY

■ Warning!
remove plug from mains
before adjusting, cleaning
or if cable is cut, damaged
or entangled.
■ The blades continue to rotate
for a few seconds after the
machine is switched off.
■ Caution – do not touch the
rotating blade.
Your machine
insulated for safety and requires
no earth
operating voltage is 220-240V
AC, 50 Hz. Only use approved
extension cables.
Extension cords/leads should
only be used if they comply with
H05VV-F, H05RN-F types or
IEC type design (60227 IEC 53,
60245 IEC 57).
If you want to use an extension
cable when operating your
product, only the following cable
dimensions should be used:
English (Original Instructions)
should
Switch
is double
connection.
SL
● 1.5 mm 2 : max. length 60 m
● 2.5 mm 2 : max. length 100
m
Note: If an extension cable is
FOR
used it must be earthed and
connected through the plug to
be
the earth cable of your supply
network in accordance with
prescribed safety regulations.
off,
Inadequate extension cables
can be dangerous. Extension
cable, plug and socket must be
of watertight construction and
intended for outdoor use.
WARNING: For your safety, it is
required that the plug attached
to the machine is connected
with the extension cord. The
coupling of the extension cord
must be protected against
splash water, be made of
The
rubber or coated with rubber.
The extension cord must be
used with a cable strain relief.
The connection lead must be
inspected for signs of damage
at regular intervals and may only
be used if in perfect condition.
ENVIRONMENTAL
PROTECTION
10
WARNING
Separate collection of
used products and