Preset Scan; Dvd Video Player Operations - Clarion VX400 Mode D'emploi Et Manuel D'installation

Radio Operations

Preset Scan

The Preset Scan receives the stations stored in
the preset memory in order. This function is
useful when searching for the desired station in
memory.
1. Touch the [Band] key to select the desired
band. (FM or AM).
. Touch the [List] key to display the Preset
List screen.
. Touch the [PS] key to start the Preset Scan.
The unit starts scanning each station for 10
seconds sequentially. Presets with a weak
signal will be skipped.

DVD Video Player Operations

Change DVD System Settings
Note:
If the set up operation is performed in
the middle of DVD video play, the disc
will restart from the beginning.
Selecting DVD Set Up Menu
1. Touch the [Settings] key on the Main
Menu to access the Video set up menu.
. Touch the [Video] key. The video menu is
displayed.
Setting up the Screen Size
1. Touch the [Aspect Ratio] key in the Video
sub menu to change the sceen size.
. Touch the desired aspect ratio: 4:3 or 16:9.
The factory default setting is " 16:9 ".
• When watching a wide type through a
conventional type of the rear view monitor
(4:), the leftmost and rightmost areas of the
screen are cut off.
This function allows displaying the important
part of image fully on the screen. In some
cases, image is displayed while being panned
(scrolled).
4. When the desired station is tuned in, touch
the [PS] key again to continue receiving that
station.
LOC/DX Setting
The DX / LOC setting changes the tuner
sensitivity in order to seperate closely spaced
stations. This feature is useful in areas that
have many radio stations in close proximity.
1. Touch the [List] key to display the Preset
List screen.
. Touch the [DX] key to switch to DX
tuner sensitivity.
. Touch the [LOC] key to switch to Local
tuner sensitivity.
• When watching a wide type through a wide
type of the rear view monitor (16:9),
the leftmost and rightmost areas of the
screen are not cut off.
Setting up the Video System Format
1. Touch the [Aux IN] key in the Video sub
menu to set up the video system format.
. Touch the required format : Auto, PAL or
NTSC.
The default setting is Auto.
Setting up the AUX Input Sensitivity
1. Touch the [AUX Input Sens] key in the Video
sub menu to set up the sensitivity level.
. Touch the desired sensitivity level displayed:
Low, Mid or High.
The default setting is Mid.
1
VX400/VZ400