Radio Operations; Recalling A Preset Station; Manual Memory; Manual Tuning - Clarion VX400 Mode D'emploi Et Manuel D'installation

Radio Operations

Listening to the Radio
1. Touch the [Tuner] key on the Main menu
display. The tuner mode screen is displayed.
. Touch the [BAND] key or touch the [Band]
button on remote control to select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order: FM1, FM, FM, AM, FM1...
1
8
7
6
11
1 - Band key
 - Scan key
 - Tune Up key
4 - Tune Down key
5 - Audio Settings
key
Seek Tuning
1. Touch the [BAND] key to select the radio
band (FM or AM).
. Touch the [ ] or [
Seek
automatically seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.

Manual Tuning

1. Touch the [BAND] key to select the radio
band (FM or AM).
. Touch the [ ] or [
M-Seek
automatically seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.
0
VX400/VZ400
9 10 
1
6 - List key
7 - Seek Down key
8 - Seek Up key
9 - Eject key
10 - Main Menu key
11 - Tuner display
] key to
Seek
] key, the station is
Seek
] key, the station is
Seek
] key to
M-Seek
] key, the station is
M-Seek
] key, the station is
M-Seek

Recalling a preset station

There are  ways to recall the preset station.
• Using the remote control:
1. Touch the [BAND] button to select the
desire band (FM or AM) on the remote
control.
. Touch the preset number (1 to 1) on
numeric pad.
• Using the tuner unit:
1. Touch the [BAND] key to select the
desire band (FM or AM) on the tuner.
. Touch the [List] key to display the Preset

List screen.
. Touch the preset station (1 to 1) on tuner
display.
4. Touch [ ] or [
4
up or down the preset list.
5. Touch the [PS] button to begin scanning
5
the preset stations.

Manual memory

1. Touch the desired Band key to select the
band you wish to store in.
. Tune in the station you wish to store using the
seek tuning, manual tuning, or preset tuning.
. Touch and hold the desired Preset key you
wish to store the current station for more than
 seconds.
4. Touch [ ] or [
up or down the preset list.
Auto Store
The Auto Store is a function for storing up to 1
stations that are automatically tuned in
sequentially. If 1 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Touch the [Band] key to select the desired
band. (FM or AM)
. Touch and hold the [Auto Store] key to start
the Auto Store function.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
] to select next station
] to select next station