Clarion VX400 Mode D'emploi Et Manuel D'installation page 39

HD Radio Operations
Auto Store
The Auto Store is a function for storing up to 16
stations that are automatically tuned in
sequentially. If 16 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Touch the [Band] key to select the desired
band. (FM or AM)
. Touch and hold the [Auto Store] key to start
the Auto Store function.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
Preset Scan
The Preset Scan receives the stations stored in
the preset memory in order. This function is
useful when searching for the desired station in
memory.
1. Touch the [Band] key to select the desired
band. (FM or AM)
. Touch the [PS] key to start the Preset Scan.
The unit starts scanning each station for 10
seconds sequentially.
. When the desired station is tuned in, touch
the [PS] key again to continue receiving that
station.
HD Radio Subchannel Function
1. Touch the [HD] key to enter the Subchannels
list.
. To tune to the desired subchannel touch the
corresponding key.
. You can save your desired subchannel by
touching and holding the desired Preset key
you wish to store the current subchannel for
more than  seconds.
Note: Not all stations have HD Radio
subchannel broadcasts.
iTunes Tagging Function
This unit offers iTunes® Tagging, which
allows the user to "Tag" songs playing on HD
Radio™ stations for purchase later through
iTunes. When press TAG key, the unit
stores the title and artist song information that
can then be transferred to your iPod when
connected to the unit. A list titled "Tagged"
will appear in iTunes, allowing you the option
to purchase your tagged songs.
1. Touch the [TAG] key to store the current
music information to memory.
. Up to 64 tags will be stored in the memory.
. When the unit is switched to iPod mode, the
unit will automatically transfer the tags to the
iPod/iPhone.
Note: Not all broadcasted material can be
tagged. The iTunes Tagging function is
only available for Apple iPod and iPhone
devices.
Downloading Tags to Your iPod
To download tags to your iPod, plug an iPod
into the unit. All existing tags are automatically
transferred to the iPod and deleted from the
head unit's memory. If an iPod is connected
when a song is tagged, the Tag will be
automatically transferred to the device when
the iPod mode is selected.
9
VX400/VZ400