Preset Scan - Clarion DXZ588RUSB Mode D'emploi

01_DXZ588RUSB_EN.book 18 ページ ２００７年１１月２７日 火曜日 午後６時５分
Radio Operations
Manual memory
1. Select the desired station with seek tuning or
manual tuning.
2. Press the [ ] button to enter the
preset memory mode. Press the [UP] or [DN]
button to select a desired station, then press
and hold the [
or longer to store the current station into
preset memory.
Auto store
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Press the [MENU] button and select the
desired band (FM or AM (MW/LW)).
2. Press the [OPTION] button.
3. Push the [SEEK PANEL] leftward or
rightward to select "AUTO STORE".
4. Press and hold the [
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
18
DXZ588RUSB
] button for 2 seconds
] button for 2

Preset scan

Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for a desired station in memory.
1. Press the [OPTION] button.
2. Push the [SEEK PANEL] leftward or
rightward to select "PRESET SCN".
3. Press the [ ] button.
∗ When a desired station is tuned in, press the
[ ] button again to continue receiving
that station.