Clarion VX400 Mode D'emploi Et Manuel D'installation page 19

Basic Operations
Adjusting the Treble
The Treble gain and Treble frequency can
be adjusted as follows.
1. Touch [ + ] or [ - ] key to set the desirable
level.
. To set the Treble center frequency, enter
the Audio adjustment in the SETUP menu.
Adjusting the Balance/Fader
The Balance or Fader can be adjusted as
follows.
1. Touch the [R] or [F] key to adjust to the
fader level.
• The factory default setting is "0".
(Adjustment range: front 9 to rear -9)
. Touch the [L] or [R] key to adjust to
the balance level.
• The factory default setting is "0".
(Adjustment range: left -9 to right 9).
Adjusting the Subwoofer
The Subwoofer can be adjusted as follows.
1. Touch the [ ] or [
the subwoofer level.
• The factory default setting is "0".
(Adjustment range: left -9 to right 9).
Adjusting the Loudness
The Loudness can be adjusted as follows.
1. Touch the [ - ] or [ + ] key to turn loudness
On or Off.
Adjusting the clock
1. Touch the [Settings] key. The Settings
menu will be displayed.
. Touch the [Clock] key in General sub
menu.
. Set up the time by touching the digital
numbers on the screen. After inputting the
time, you can choose AM or PM if the Clock
Mode is set to 1 Hr.
] key to adjust to
4. Touch the [Clock Mode] to change time
settings to 1Hr or 4Hr.
Adjusting the Radio region
1. Touch the [Settings] key. The Settings
menu will be displayed.
. Touch the [Radio Field] key in the General
sub menu.
. A region selection menu will appear. Scroll
down using the arrow at the bottom of the
menu. Scroll up using the arrow at the
bottom of the menu. Select the area's radio
region that you are in. If the region selected is
incorrect, radio reception will be poor.
Reset to Factory Defaults
1. Touch the [Settings] key. The Settings
menu will be displayed.
. Touch the [Others] key.
. Touch the [Reset] key.
Select [YES] to restore your unit to factory
default settings. This function will erase all
memory from the unit and you must reset all
personalized items such as tuner presets.
NOTE: You will be asked once to confirm that
you would like to reset the unit. The unit will
power down and restart with factory defaults.
19
VX400/VZ400