Radio Operations; Recalling A Preset Station; Manual Memory - Clarion NX500 Mode D'emploi Et Manuel D'installation

Radio Operations

Listening to the Radio
1. Touch the Tuner button on the Main menu
display. The tuner mode screen is displayed.
2. Press the [BAND] button or touch the [Band]
key on remote control to select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order: FM1, FM2, FM3, AM, FM1...
4 1
5
12
13 14
7 9
8 10 11
1 - Tuner display
2 - Clock display
3 - Main Menu button
4 - Band display
5 - Loc/DX display
6 - Preset list
7 - Seek down
8 - Tune down
9 - Scan button
10 - Tune Up
Seek Tuning
1. Press the [BAND] button to select the radio
band (FM or AM).
2. Touch the [ ] or [
automatically seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.
Manual Tuning
1. Press the [BAND] button to select the radio
band (FM or AM).
2. Touch the [ ] or [ ] key to
automatically seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.
22
NX500/NZ500

Recalling a preset station

There are 2 ways to recall the preset station.
• Using the remote control:
1. Press the [BAND] button to select the
2. Press the preset number (1 to 6) on
• Using the tuner unit:
2 3
1. Press the [BAND] button to select the
2. Press the preset station (1 to 5) on tuner
3. Press [
4. Press [AS] button to auto search and store
6

Manual memory

1. Touch the desired Band key to select the
band you wish to store.
2. Tune in the station you wish to store using the
15 16 17
seek tuning, manual tuning, or preset tuning.
3. Touch and hold the desired Preset key you
wish to store the current station for more than
11 - Seek Up
2 seconds.
12 - Band button
13 - AS/PS button
Auto Store
14 - Loc/DX Button
15 - Previous page
The Auto Store is a function for storing up to 12
button
stations that are automatically tuned in
16 - Next page button
sequentially. If 12 receivable stations cannot be
17 - EQ button
received, a previously stored station remains
unoverwritten at the memory position.
1. Touch the [Band] key to select the desired
band. (FM or AM)
2. Touch and hold the [AS] key to start
the Auto Store function.
A beep sounds and the stations with good
] key to
reception are stored automatically to the
preset channels.
] key, the station is
] key, the station is
] key, the station is
] key, the station is
desire band (FM or AM) on the remote
control.
numeric pad.
desire band (FM or AM) on the tuner.
display.
] or [ ] to select next station up
or down the preset list.
the stations.