Service - Aventics ITS 160 Notice D'instruction

70 AVENTICS | ITS | R412020619–BAL–001–AD

Service

Danger of explosion due to sparking!
When loosening parts that have become firmly attached due to corrosion or other causes,
sparks can form and may lead to an explosion.
Do not use force to loosen the corroded parts in an explosive atmosphere.
Use low-spark tools in the explosive area.
Danger of injury caused by falling of the useful load!
With a vertical installation position of the cylinder, a suspended load can fall when the
compressed air supply is switched off.
Always secure the area below a suspended load.
Danger of burns caused by hot surfaces!
The valve, cylinder and adjacent system parts are heated during continuous operation.
Contact with these surfaces can result in burns.
Do not touch the cylinder or adjacent system parts while the system is in operation.
After switching off the system, first allow the heated components to cool before touching
the surfaces.
9 Service
DANGER
WARNING
CAUTION