Accessories And Attachments; Recommended Accessories - Promac 349V2 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

electrician.
IMPROPER CONNECTION of the equipment-grounding conductor can result in risk of electric shock. The conductor with
green insulation (with or without yellow stripes) is the equipment-grounding conductor. If repair or replacement of the
electric cord or plug is necessary, DO NOT connects the equipment-grounding conductor to a live terminal.
CHECK with a qualified electrician or service person if you do not completely understand the grounding instructions, or if
you are not sure the tool is properly grounded.
Refer to nether picture:
Properly Ground Outlet
Grounding Prong
3-Prong Plug
WARNING:
Improper connection of equipment grounding conductor can result in the risk of electrical shock. Equipment
should be grounded while in use to protect operator from electrical shock.
WARNING:
This machine is for indoor use only. Do not expose to rain or use in damp locations.
GUIDELINES FOR EXTENSION CORDS
USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord,
be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line
voltage, resulting in loss of power and cause overheating.
Be sure your extension cord is properly wired and in good condition. Always replace a damaged extension cord or have
it repaired by a qualified person before using it. Protect your extension cords from sharp objects, excessive heat and damp
or wet areas.
Attention: There is an overcurrent protection device in
the circuit.

ACCESSORIES AND ATTACHMENTS

RECOMMENDED ACCESSORIES

WARNING:
To avoid injury:
• Use only accessories recommended for machine.
• Follow instructions that accompany accessories. Use of improper accessories may cause hazards.
• Use only accessories designed for this machine to avoid injury from thrown broken parts or work pieces.
• Do not use any accessory unless you have completely read the instruction or operator's manual for that
accessory.
Overcurrent protection
15

Publicité

Table des Matières
loading

Table des Matières