Troubleshooting; Environmental Protection; Available Accessories - Promac 349V Mode D'emploi

Deactivating the machine
If the machine is to be inactive for a long period, prepare
the machine as follows:
- Detach the plug from the electric supply panel.
- Carefully clean and grease the machine.
- If necessary, cover the machine
9. Trouble shooting
Motor doesn't start
*No electricity-
check mains and fuse.
*Defective switch, motor or cord-
consult an electrician.
*Overload has reacted-
Wait for automatic reset.
Machine vibrates excessively
*Stand on uneven surface-
adjust for even support.
*saw blade has cracks-
replace saw blade immediately
*Tool heavy a cut-
reduce feed pressure and feed speed.
Cut is not square
*Saw arm setting is bad
*Blade guide setting is bad.
*Saw blade is dull.
Cutting surface is bad
*Wrong saw blade chosen
*Saw blade is dull
*Blade guide setting is bad
*Blade tension too low
*Feed pressure too high
*Feed speed too high

10. Environmental protection

Protect the environment.
Your appliance contains valuable materials which can be
recovered or recycled. Please leave it at a specialized
institution.

11. Available accessories

Article number 10048
foldable stand
Article number 2168
Stick wax
Refer to the pricelist for various saw blades.
Environmental protection
Protect the environment.
Your appliance contains valuable materials which can be
recovered or recycled. Please leave it at a specialized
institution.
This symbol indicates separate collection for
electrical and electronic equipment required
under the WEEE Directive (Directive 2012/19/EC)
and is effective only within the European Union.