Product Specifications - Ivoclar Vivadent BluephaseN M Mode D'emploi

8. Product specifications

Light source
Wavelength range
Light intensity
Operation
Light probe
Anti-glare cones
Signal transmitter
Dimensions of the handpiece (without
light probe)
Weight of the handpiece (including
light probe and battery)
Operating voltage handpiece
Power pack
Operating conditions
Dimensions of the charging base
Weight of the charging base
(including power pack)
Charging time
Power supply handpiece
Transportation and storage conditions
Delivery form
14
LED
430 – 490 nm
800 mW/cm ± 10 %
2
continuous operation
Ø 10 mm, black, disinfectable and autoclavable
autoclavable
acoustic after 10 seconds and every time the start button / time selection button is pressed
L = 260 mm, W = 42 mm, H = 120 mm
230 g
3.7 VDC
Input: 100–240 VAC; 50-60 Hz; 0.28 – 0.14A
Output: 5 VDC / 2 A
Manufacturer: Friwo
Type: FW7401M/05
Temperature +10 °C to +35 °C (+50 °F to +95 °F)
Relative humidity 35% to 75%
Ambient pressure 700 hPa to 1060 hPa
D = 205 mm, W = 150 mm, H = 85 mm
350 g
approx. 1 hour (with the battery empty)
Li-Po battery (approx. 60 min. with a new, fully charged battery)
– Temperature –20 °C to +60 °C (-4 °F to +140 °F)
– Relative humidity 10% to 75%
– Ambient pressure 500 hPa to 1060 hPa
– The curing light has to be stored in closed, roofed rooms. Protect the device from severe
jarring.
Battery
– Do not store at temperatures above 40 °C / 104 °F (or 60 °C / 140 °F for a short period).
Recommended storage temperature 15–30 °C (59–86 °F).
– Keep the battery charged and store no longer than 6 months.
1 Handpiece
1 Battery
1 Charging base with power cord and power pack
1 Light probe 10 mm, black
3 Anti-glare cones
1 Instructions for Use