Normal Operation - Burkert 3003 Manuel D'utilisation

learning mode
specify end positions
→
Press <OPEN> and <CLOSE>
pushbutton and switch on the card
(hold down pushbutton).
The RED and the GREEN LEDs light up.
G R →
Release <OPEN> and <CLOSE>
pushbutton.
Both LEDs go out.
Learning mode is selected.
→
Press <CLOSE> pushbutton to move
the shut-off valve into the closed
R
position.
The RED LED lights up.
→
Press <MEM> and <CLOSE> push-
button to save the closed position.
R
The RED LED lights up 2x.
→
Press <OPEN> pushbutton to move
the shut-off valve into the open
G
position.
The GREEN LED lights up.
→
Press <MEM> and <OPEN> push-
button to save the open position.
G
The GREEN LED lights up 2x.
Type 3003
Installation
specify end positions
All positions are now saved.
→
Disconnect the card from the power
supply.
7.4.3. normal operation
display normal operation
→
Switch on card.
The GREEN LED lights up 3x to indicate that the
G
start process has been implemented correctly.
In normal operation the GREEN LED lights up
G
when the rotary actuator opens the shut-off valve.
The RED LED lights up when the rotary actuator
R
closes the shut-off valve.
If neither of the LEDs is lit, the actuator is not
G R
actuated.
The RED and the GREEN LEDs light up if the
torque is too high and the rotary actuator stops.
→
Change direction of rotation of the rotary
G R
actuator or switch over the voltage OPEN/
CLOSED to restart the rotary actuator!
english
19