Dometic MS660 Instructions De Montage Et De Service page 49

MS660
11.6 Using the convenience locking function
If the vehicle has been equipped with a convenience module and software
function 4 "Convenience locking function" is activated, you can use the hand-held
transmitter to, e. g.:
• Close windows
• Close the sunroof
• Lock the boot or fuel tank lid
• Switch on dipped headlights
• Switch on the parking heating
To do this, proceed as follows:
➤ Press and hold the "Lock" button until e. g. the vehicle windows have closed
completely.
I
NOTE
Alternatively, you can program the control to a fixed duration of 25 sec.
(software function 19, see chapter "Programming MagicSafe" on
page 36).
11.7 Displaying the cause of the alarm
MagicSafe stores triggered alarms. The memory can display the last five alarm
situations.
If an alarm was triggered, this is indicated by a short flashing of the indicator (0.5 sec.)
when the vehicle is unlocked.
This is how to display the cause of the alarm:
➤ Deactivate the alarm system by pressing the "Unlock" button.
➤ Press the "Lock" and "Unlock" buttons simultaneously.
✓ The status LED shows the last five saved alarm causes in the form of flashing
signals, in accordance with the following list:
EN
Using MagicSafe
49