Dometic MS660 Instructions De Montage Et De Service page 43

MS660
●
Press the respective button
● ● (1 sec.)
Press the button twice in a row within 1 sec.
● ● (30 sec.) Press the button twice in a row within 30 sec.
11.2 Activating MagicSafe
To activate the alarm system manually, proceed as follows:
➤ Close the doors of the vehicle.
➤ Press the "Lock" button on the hand-held transmitter for approx. 1 sec.
✓ The hazard lights flash twice.
✓ The alarm system is activated after approx. 30 sec. The status LED flashes in
confirmation.
On vehicles with central locking, the doors and boot are locked when the alarm
system is activated. If the vehicle is equipped with an original convenience function
(e. g. electric windows or electric sunroof), these will also be locked. You can control
the convenience function separately using the "COMFORT" button (see chapter
"Using the convenience locking function" on page 49).
If the alarm system is activated when a door, the bonnet or boot is open, the status
LED flashes every 3 sec. to indicate the problem.
If the door, bonnet or boot is closed within the next 15 sec., it will be reintegrated
into the alarm. If the door, bonnet or boot is closed after the 15 sec. have elapsed, it
will not be monitored.
Activating the alarm system so that the vehicle can remain occupied
You can set the alarm system so that the alarm system does not trigger an alarm when
a movement is registered in the interior of the vehicle, e. g. to leave a pet in the
vehicle.
Proceed as follows:
➤ Press the "Lock" button twice in a row within 30 sec.
✓ The hazard lights flash once.
EN
Using MagicSafe
43