Dometic MS660 Instructions De Montage Et De Service page 37

MS660
No. Software function
10 Locking the central locking during
self-activation
11 Locking/unlocking with ignition
12 Alarm detection for additional
sensors
13 Additional relay function
15 Bonnet contact input
16 Door contact/boot input
18 Car Finder/convenience function
on
19 Switch time for convenience locking
function
20 Deactivation of faulty door contacts
24 Visual signals
10.2 Description of the software functions
Function 1 (Siren sound – confirmation tone when activating and
deactivating)
This function enables a siren confirmation tone when the alarm system is activated
and deactivated.
I
NOTE
By activating the acoustic confirmation tone, the alarm system no longer
conforms to regulation 95/56/EC.
The operating approval for your vehicle expires within the scope of
validity of this directive!
EN
Programming MagicSafe
"Lock" button
On
On
Additional sensor Additional sensor and
Starter circuit
breaker
(➔ no. 5)
Switch open when
the bonnet is open
(12 volts)
Switch open when
the door is open
(12 volts)
Car Finder
25 sec. (auto)
On
Hazard light
"Unlock" button
Off
Off
ultrasonic sensor
Alarm output
(➔ no. 9)
Switch closed
when the bonnet is
open (0 volts)
Switch closed
when the door is
open (0 volts)
Convenience
output on
(➔ no. 8)
Manual
(➔ no. 4)
Off
Indicator
37