Dometic MS660 Instructions De Montage Et De Service page 31

MS660
• Connection to central locking system MagicLock ML44 and ML22: fig. j,
page 12
No. in fig. e
to fig. i
1
➤ Insulate any unconnected cables.
Grey/white (P4)
This cable provides an additional earth controlled input for optional accessory
modules (e. g. wired magnetic contact switch).
Blue (P5)
The external backup siren MS-670SI (accessory) can be connected to this cable.
➤ Connect the blue cable to siren MS-670SI in accordance with fig. a, page 7.
Grey cable belonging to MS-670SI
If you have installed the bonnet contact switch belonging to MS660 (see chapter
"Installing the bonnet contact switch" on page 23), you have to connect it to the
grey cable belonging to siren MS-670SI.
➤ Connect one end of the grey cable to the cable of the bonnet contact switch.
➤ Connect the other end of the grey cable to the grey cable (P8) belonging to
MS660.
Green/red
This cable serves as a convenience output. The convenience output is earthed and
can be charged with up to 1 A.
A
NOTICE!
When connecting consumers with a power consumption of more than
1 A (e. g. dipped headlights), an additional operating current relay must
be used.
The convenience function allows you to e. g.:
• Close windows
• Close the sunroof
• Switch on dipped headlights
EN
Designation
Control unit for the vehicle's own central locking system
Connecting the power to MagicSafe
31