Opening The Housing - Ingeteam INGECON SUN STORAGE 1Play TL M Manuel D'installation

Installing the unit
2. Fix the plate using stainless steel fittings to prevent corrosion. Suspend the unit from the plate by fitting
the two slats in the openings on the back of the unit. Use the two side holes to grasp the unit with both
hands.
3. Screw on the bottom attachment.
4. Check that the unit properly secured.

6.3. Opening the housing

To access the inside of the unit open the cover of the housing by removing the four front screws.
ABH2014IQM01_A - Installation and Operation Manual
Ingeteam
EN
ES
FR
PT
23