Ingeteam INGECON SUN STORAGE 1Play TL M Manuel D'installation page 39

Connecting the digital outputs
1. Pass the CAN communication wiring through the dedicated cable grommet
inlets").
2. If you wish to use the Normally Open contact, connect the wiring in the NO and COM positions in the J36
EXT terminals. 1 RELAY and/or J44 EXT. 2 RELAY as shown in the previous figure.
3. If you wish to use the Normally Closed contact, connect the wiring in the NC and COM positions in the
J36 EXT terminals. 1 RELAY and/or J44 EXT. 2 RELAY as shown in the previous figure.
4. Check that the connection is tight.
ABH2014IQM01_A - Installation and Operation Manual
Ingeteam
"2.5. Description of cable
39
EN
ES
FR
PT