Installation Of Sizes I And - ProMinent 1021157 Notice Technique

Installation
26
4
Fig. 1: Sample installation, size 0
5.2 Installation of sizes I and II
(V = 0.35 l or 1 l)
(see also sample installations)
IMPORTANT
Note direction of flow through the accumulator (direction arrow
on the housing).
Fit the accumulator into a horizontal line – the higher part of the
accumulator must be pointing straight up!
The accumulator should also be secured with a pipe clamp (see
accessories). The accumulator and tubing must not vibrate.
3 2 1
5
1 Adjustable back
6
2 Discharge valve
7
3 Stop valve
4 Pressure gauge
5 Multifunction valve
6 Pulsation damper
7 Metering pump
pressure valve
ProMinent ®