Fitting Advice; Socket Attachment - Blatchford KX06 Instructions D'utilisation

10 Fitting Advice

Problem
The user's sitting movement is too slow.
The user's sitting movement is too fast.
The device does not release from stance.
The heel rise is too high during swing.
The heel rise is too low during swing.
The user is experiencing terminal
impact.
The device does not fully extend during
swing.

11 Socket Attachment

Ensure socket does not contact the knee control or posterior link arms when fully flexed.
The socket may contact the carrier only.
Solution
Decrease the stance support (see Section 8.2).
Increase the stance support (see Section 8.2).
1. Make sure that the user loads the toe of the foot
2. Make sure that the ankle-foot unit's dorsiflexion
3. Re-check alignment. Socket may be too
Increase the flexion resistance (see Section 9.1).
Decrease the flexion resistance (see Section 9.1).
Increase the extension resistance (see Section 9.2).
Decrease the extension resistance (see Section 9.2).
Carrier
unit while initiating swing and that the device
reaches full extension.
resistance is not too low.
posteriorly aligned causing the knee to flex/yield
at heel strike).
14
Socket
938409PK1/1-0121