Fitting Advice - Blatchford 903220/200 Instructions D'utilisation

7 Fitting Advice

The instructions in this section are for practitioner use only.
Cutting to Length
The device may be cut to the required length (see Fitting Length in Section 8). Ensure the device
is cut square and the end has sharp edges removed.
941237
30 mm
Symptom
A recurring noise occurs at any clamping
point.
The device moves out of position.
Solution
The device must be secured with no
movement. Check that the end of the tube has
been cut squarely.
User must not use the device until adjusted,
repaired or replaced.
7
938210PK1/1-0121