Ordering Information - Blatchford KX06 Instructions D'utilisation

16 Ordering Information

Device
KX06V2
Spare Parts
Knee pad kit (includes knee pad, 2.5mm hex key and 2 x M3 x 10 mm hex
socket cap head screws)
Knee pad screw (M3 x10 mm hex socket cap head screw)
Cover replacement kit (includes cosmetic cover, 2.5 mm hex key, 5 x M4 x
12 mm low profile hex socket cap head screws and 5 x cover fixing spacers)
Spacer and screws kit for cosmetic cover (includes 4 x M4 x 12 mm low profile
hex socket cap head screws and 4 x cover fixing spacers)
Cover screw: M4 x 12 mm low profile hex socket cap head screw
Cover spacer
Hydraulic-knee-control adjuster
Liability
The manufacturer recommends using the device only under the specified conditions and for
the intended purposes. The device must be maintained according to the instructions for use
supplied with the device. The manufacturer is not liable for any adverse outcome caused by any
component combinations that were not authorized by them.
CE Conformity
This product meets the requirements of the European Regulation EU 2017/745 for medical
devices. This product has been classified as a class I device according to the classification rules
outlined in Annex VIII of the regulation. The EU declaration of conformity certificate is available at
the following internet address: www.blatchford.co.uk
Medical Device
Compatibility
Combination with Blatchford branded products is approved based on testing in accordance
with relevant standards and the MDR including structural test, dimensional compatibility and
monitored field performance.
Combination with alternative CE marked products must be carried out in view of a documented
local risk assessment carried out by a Practitioner.
Description
17
Single Patient – multiple use
Part Number
KX06V2
239561
910408
239661
239761
913216
236122
940091
938409PK1/1-0121