Differentiation Wingstabi Easycontrol/Classic/Evo - Multiplex WINGSTABI Evolution Mode D'emploi

7. Differentiation WINGSTABI EasyControl/Classic/EVO

Attention! The Wingstabi Evolution is always supplied as «Evolution easycontrol» as standard and can be upgraded to «Evolution classic» free of
charge via the MPX Launcher to the «Evolution classic».
EasyControl
• The model is programmed completely on the transmitter as before (deflections, flaps, expo, flight phases...).
• We need a free channel to which we assign a free proportional control element
• Very easy to set up even without a PC
Classic
• The model is almost completely programmed in the WINGSTABI (deflections, mixers, flaps...).
• We need a free 3-step switch and at least one free proportional control element
• Extensive set-up on the PC or the APP
Evolution
What is the WINGSTABI ?
For the development of the WINGSTABI Evolution, we have been able to create an enormous database of the most diverse flight models over the years.
With the WINGSTABI Evolution, the control system has been fundamentally optimised in terms of performance, latency and basic settings.
All previous WINGSTABI systems can be updated to the Evolution software free of charge and without restrictions.
This means that the WINGSTABI Evolution can now be used directly with almost all flight models out of the box efficiently
A large number of new innovations and functions have also been incorporated into the WINGSTABI Evolution software, which should now leave no wish unfulfilled.
An example would be:
- Speed-dependent control
- Stop function
- Receiver Diversity via SRXL
- ...
31