Assembly - Multiplex WINGSTABI Evolution Mode D'emploi

6. Assembly

Right
Flight axis
Wrong
Flight axis
Mounting position: side view
IMPORTANT NOTE:
The Wingstabi must be installed horizontally in relation to the flight axis. This must
i
Right
be observed for all three axes of the model or the WINGSTABI! Skewed positions
lead to corrections with the wrong rudder.
The Wingstabi should be installed as firmly as possible in the model so that it does
Flight axis
not vibrate. Excessive vibrations irritate the system. Therefore Velcro fastenings,
foam pads or similar are NOT suitable.
Wrong
High-quality adhesive tape, cable ties or similar are suitable.
Flight axis
Mounting position: view from above
30