Set A Destination Folder For Scans - HP Designjet T1120 SD-MFP Guide De Référence Rapide

●
Press the Paper Forward button if you wish to eject the original out the back
of the scanner.

Set a destination folder for scans

The instructions below describe how to set up and select a destination folder in
which you will save your scan-to-file output. Destinations are folders on computers
known to your system through the local network (LAN) or folders on a USB flash
drive inserted in the touch screen.
1. Make sure your system and any intended destination computers are correctly
set up on your local network (LAN). Configuration of your system on the LAN
is carried out through the Options > Advanced Options > Network menu.
This is a system administrator option that may require a password.
2. If you wish to save your scans on a USB flash drive, press the Scan button
and insert the drive into the USB port on the touch screen. The system will
detect the drive and enquire whether you want to set/change the destination
to USB.
3. To access the destination setup options, press Options > Advanced
Options > Manage Destinations. From there you can select, add and change
destinations.
6 Chapter 2 Basic operations ENWW