Troubleshooting; The System Reports An Error; There Is A Paper Jam - HP Designjet T1120 SD-MFP Guide De Référence Rapide

4

Troubleshooting

The system reports an error

The system will report an error message on your screen when an error is detected.
Correcting common errors
The actual nature and cause of the error will be reported through a message on
your screen.
The information on your screen may include instructions and actions to remedy the
error. If this is the case, follow the instructions on your screen.
If your screen does not display a solution, look for a description of the error and
remedy in the troubleshooting sections of this quick guide, or in the system's on-
line-help. Follow the instructions provided.
Most scan-quality errors can be resolved by cleaning and calibrating the scanner.
If your error is not resolved in that way:
●
Try restarting the system by turning the scanner off and then on.
●
Try resetting the system's factory defaults through Options > Advanced
Options > Factory Defaults.
●
Try to recover the last system image known to work satisfactorily. See
to update or recover the system on page
If the above actions fail to resolve the problem, contact technical assistance (see
below).
Technical assistance
In some cases you may need technical assistance. You should contact HP support
if one or more of the following cases is true:
●
The error cannot be remedied through the action suggested on your touch
screen nor through any of the steps described above under "Correcting
common errors".
●
The error and its remedy is not described in this guide and cannot be remedied
through any of the steps described above under "Correcting common errors".
●
The system fails to report the error on your screen and it cannot be remedied
through any of the steps described above under "Correcting common errors".

There is a paper jam

You know a paper jam has occurred when the scanner stops scanning while the
document is still engaged in the drive system. Your system will report the paper
jam. To remedy this, try to eject the document from the scanner: press and hold
30 Chapter 4 Troubleshooting
35.
I need
ENWW