Set Input And Output Sizes - HP Designjet T1120 SD-MFP Guide De Référence Rapide

3. You can fine-tune the Original Type settings (optional): Press the More button
relevant to the selected Original Type. Press OK when done.
4.
Press the Context-sensitive Help button
each setting and about saving your settings as a new custom Original Type.
NOTE: You can press the Preview Before Scan/Copy button and then the
Adjustment button to make image adjustments and view the effects on your screen.
See Preview copies and scans on page

Set input and output sizes

The "Scan Area" is your input size and defines how much of the image is captured.
Often, this will be equal to the total size of the original. However, there may be cases
when you only want to scan a portion of the original or wish the capture area to be
equal to a certain standard size.
When copying, you can also determine the output size (the size of the image in your
printed copy) through the Resize setting. You can choose No resize to use the
current Scan Area size for a 1:1 copy, or you can select a different size in order to
reduce or enlarge the printed image in relation to the Scan Area size.
NOTE: When scanning, the image's size in the output file is always equal to the
Scan Area size (1:1).
Set the Scan Area (input size) for Copy and Scan
When in the Scan or Copy screens, press the Scan Area button to view the Scan
Area size list.
ENWW
to expand the Original Type dialog and make adjustment options
for additional information about
15.
Set input and output sizes
13